RGT Hobby would like to introduce Pro Runner EX86130 1/10 4WD off-road crawler for all terrain.The package comes with realistic detail body shell with high grade glossy paint. It also comes with new design of realistic wheel with memory foam insertions. High performance tyres for those who like rock crawling and mud digging.
Front and rear straight axles
Two-speed gearbox and DIG system
Rear axle lock function
Freely switch from the front-drive mode to the four-wheel drive mode
6% front-rear speed ratio
CNC steel spiral main gear
Reverse transmission system
The low axial effect, excellent crossing performance, and high durability
Refer to the exterior design and interior decoration of the Ford Raptor Edition
Main body adopts a hardened stainless-steel chassis beam.
The integral straight axle comes with a caster angle.
The front-drive steering driveshaft uses steel #1144CVA material.
46-degree steering angle and positive Ackerman angle.
Servo mounted on the axle, 25T metal servo arm.
Low center of gravity with limited-slip reducer, all metal gears with #45 steel reduction shaft.
High-low speed 2 gears switching.
Equipped with DIG rear axle locking function, which brings a smaller turning radius for the car and has a front-wheel drive function.
The front and rear axles use CNC steel spiral gear
he front and rear drive shafts are made of #1144 steel CVD structure
6mm diameter solid metal 8 connecting rod structure
The suspension system adopts a CNC aluminum alloy twisted hydraulic shock absorber
CNC winch mount, 25KG, 360 degree metal winch servo, winch steel cable can be stretched up to 90CM, supporting the stretching weight up to 15KG
The front bumper adds a stainless steel protective plate, which can be realistic and effectively protect the winch servo
The "Pro Runner" will be oriented to players in the form of an RTR version, equipped with a 35T RC550 super-strong torque motor, "Hobbywing" WP-1060 special waterproof electronic speed controller with metal gear for the crawler, 25KG all-metal gear waterproof steering servo, ESC can support 2-3S lithium battery mode, and a 6-channel 2.4G remote controller specially designed for this car

Scale: 1/10
Drive Mode: Front-Wheel Drive+4WD
Ground Clearance: 73mm (chassis), 35mm(axle)
Wheel(diameter/width): 110/40mm
Wheelbase: 313mm
Gear Ratio/Low speed: 53:1(F), 57:1(R)
Gear Ratio/high speed: 28:1(F), 30:1(R)
Front-Rear Speed Ratio: 6.00%
Ramp Angle: 29°
Approach Angle: 55°
Departure Angle: 58°
Motor/ pinion: 6235-RC550-35T, /17T
Steering Servo: Digit Metal Gear-25KG
Winch Servo: 360° Digit Metal Gear-25KG
ESC: Hobbywing WP-1060/60A
Radio/Rx: 2.4G/6CH
7.4v 4200mAh large capacity lipo battery
Fast lipo battery charger
Length 512mm x Width 240mm x Height 241mm

Package Content:
1 x RGT Pro runner RTR
1 x 7.4v lipo 4200mAh rechargeable Car battery
1 x lipo battery Charger
1 x User manual